Presentation by the John W. Lincoln Award Recipient: ASIP – The Standard Systems Approach for Ensuring Structural Airworthiness throughout the Life of an Aircraft Presenter: Dr Joseph Gallagher - USAF (RET)
9:15 AM to 10:00 AM Tuesday, December 02, 2008
Break
10:00 AM to 12:00 PM Tuesday, December 02, 2008
Overviews
Session Chair: Mr John Bowlus - USAF AFRL/RBS - Air Force
10:00 AM - 10:30 AM
USAF ASIP: Protecting Safety for 50 Years Presenter: Mr Charles Babish - USAF ASC/EN
10:30 AM - 11:00 AM
The A-10 Service Requirement Extension Presenter: Dr Mark Thomsen - USAF
11:00 AM - 11:30 AM
Tailoring an ASIP for the USMC Harrier II Aircraft Presenter: Mr Troy Hullander - Naval Air Warfare Ctr - Aircraft Division
11:30 AM - 12:00 PM
USAF F-16 Case Studies: Obtaining Fleet Status Awareness and Issue Resolution from Maintainer Generated Data Presenter: Dr Kimberli Jones - SAIC Author: Mr Bryce Harris - USAF
Session Chair: Dr Lawrence Butkus - USAF AFRL/RXSA - Air Force
3:30 PM - 4:00 PM
Initial Fatigue Quality for Large Grain Titanium Alloys Presenter: Dr Jeffrey Bunch - The Boeing Co Author: Mr Robert Bair - 478th AESW
4:00 PM - 4:30 PM
Procedures for Aircraft Structural Teardown: Best Practices Handbook Development Presenter: Dr Gregory Shoales - USAF Academy
4:30 PM - 5:00 PM
T-37B Structural Teardown Analysis Follow-On Program Presenter: Ms Molly Walters - Ctr for Aircraft Structural Life Extension Authors: Dr Gregory Shoales - USAF Academy, Dr Gregory Shoales - USAF Academy CAStLE, Mr John Pendleton - USAF 506 ACSS/CC
5:00 PM - 5:30 PM
Damage Mapping for Structural Analysis – Case Study of the T-38 Damage Database Presenter: Mr Zachary Whitman - SWRI
5:30 PM to 7:00 PM Tuesday, December 02, 2008
Reception and Poster Session
5:30 PM - 7:00 PM
Development of the F-16 Critical Aging Scenario Risk Assessment Process Poster Presenters: Mr Kevin Welch - Lockheed Martin Co Ms Lynette Hajovsky - Lockheed Martin Co Authors: Mr Kevin Welch - Lockheed Martin Co, Ms Lynette Hajovsky - Lockheed Martin Co
5:30 PM - 7:00 PM
Development of Plasticity Model for Steel Ratcheting Simulation Poster Presenters: Lt Kyriakos Kourousis - Hellenic Air Force Lt Ilias Lappas - Hellenic Air Force Authors: Lt Ilias Lappas - Hellenic Air Force, Lt Kyriakos Kourousis - Hellenic Air Force
5:30 PM - 7:00 PM
Quantified Engine Inspection Success Story Poster Presenter: Dr Alfred Broz - FAA Author: Dr Alfred Broz - FAA
5:30 PM - 7:00 PM
Reliability Centered Maintenance of the F-15 Wing Structure Poster Presenter: Dr Andrew Hinkle - Wyle Author: Dr Andrew Hinkle - Wyle
5:30 PM - 7:00 PM
Stress Corrosion Cracking Rates at Elevated Temperatures for 7079-T6 Thin Sheet Aluminum Poster Presenter: Dr Sandeep Shah - USAFA CAStLE Authors: Dr Sandeep Shah - USAFA CAStLE, Dr Scott Fawaz - USAF Academy - CAStLE, Dr Scott Fawaz - USAFA CAStLE, Ms Molly Walters - Ctr for Aircraft Structural Life Extension
5:30 PM - 7:00 PM
Advances in Simulation of Arbitrary 3D Crack Growth Using FRANC3D/NG Poster Presenter: Dr Paul Wawrzynek - Fracture Analysis Consultants Inc Author: Dr Paul Wawrzynek - Fracture Analysis Consultants Inc
Wednesday, December 03, 2008
7:00 AM to 8:00 AM Wednesday, December 03, 2008
Registration and Continental Breakfast
7:00 AM - 5:30 PM
Registration
8:00 AM to 9:30 AM Wednesday, December 03, 2008
Structural Health Monitoring (SHM)
Session Chair: Mr Robert Evans - Tinker AFB - Air Force
8:00 AM - 8:30 AM
Development and Use of Standard Environmental Exposure Spectra for Validation of Health Monitoring Presenter: Mr David Forsyth - TRI/Austin Inc Author: Dr Thomas Mills - Analytical Processes / Engineered Solutions
8:30 AM - 9:00 AM
KC-135 Structural Health Monitoring System Flight Demonstration Presenter: Maj John Yerger - Air Mobility Battlelab
9:00 AM - 9:30 AM
Structural Health Monitoring Supports Life Cycle Management of U.S. Army Helicopters Presenter: Mr David White - Spectra Technical Solutions Inc
9:30 AM to 10:00 AM Wednesday, December 03, 2008
Break
10:00 AM to 12:00 PM Wednesday, December 03, 2008
Prognostics & Risk Analysis
Session Chair: Dr Paul Hoffman - NAVAIR - Navy
10:00 AM - 10:30 AM
Development of an Equivalent Initial Flaw Size (EIFS) Distribution for ASIP Risk Assessment Presenter: Mr Kenneth Chan - The Boeing Co Authors: Dr Tony Torng - The Boeing Co, Mr Kenneth Chan - The Boeing Co
10:30 AM - 11:00 AM
Metallic Material Design Allowables – Variability to Consider in Structural Risk Analysis Presenter: Mr Richard Rice - Battelle Author: Mr Charles Babish - USAF ASC/EN
11:00 AM - 11:30 AM
Development of an Integrated Durability and Damage Tolerance Risk Assessment Strategy for ASIP Presenter: Dr Tony Torng - The Boeing Co Authors: Dr Tony Torng - The Boeing Co, Mr Kenneth Chan - The Boeing Co
11:30 AM - 12:00 PM
Rapid Determination of the Probability of Fracture for a Cracked Stiffened Panel Presenter: Dr Eric Tuegel - USAF AFRL
Session Chair: Mr Mark Derriso - USAF AFRL - Air Force
1:45 PM - 2:00 PM
Panel Introduction Session Chair: Mr Mark Derriso - USAF AFRL
2:00 PM - 3:15 PM
Structural Health Monitoring (SHM) Panel Members: Mr Peter Christiansen - USAF Mr Mark DeFazio - USAF ASC/ENFS Mr Chris Davis - The Boeing Co
3:15 PM to 4:00 PM Wednesday, December 03, 2008
Break
4:00 PM to 5:30 PM Wednesday, December 03, 2008
Panel Session II
Session Chair: Dr Eric Tuegel - USAF AFRL - Air Force
4:00 PM - 4:15 PM
Panel Introduction Session Chair: Dr Eric Tuegel - USAF AFRL
4:15 PM - 5:30 PM
Prognostics & Risk Analysis Panel Members: Dr Mark Thomsen - USAF Mr Richard Reams - USAF ASC/ENFS Dr LeRoy Fitzwater - The Boeing Co
Thursday, December 04, 2008
7:00 AM to 8:00 AM Thursday, December 04, 2008
Registration and Continental Breakfast
7:00 AM - 5:30 PM
Registration
8:00 AM to 9:30 AM Thursday, December 04, 2008
Non-Destructive Inspection / Evaluation (NDI/E)
Session Chair: Dr Charles Ward - USAF AFRL/RXL - Air Force
8:00 AM - 8:30 AM
Enhanced Defect Detection on Aircraft Structures Presenter: Mr John Mandeville - NDT Solutions
8:30 AM - 9:00 AM
Thermographic Detection of Trapped Water in Honeycomb Structures Presenter: Dr Steven Shepard - Thermal Wave Imaging Inc
9:00 AM - 9:30 AM
Lap Joint Integrity and Corrosion Preventive Compound (CPC) Evaluation using Electrochemical Impedance Spectroscopy (EIS) Presenter: Dr Sandeep Shah - USAFA CAStLE Authors: Dr Gregory Shoales - USAF Academy, Dr Gregory Shoales - USAF Academy CAStLE
9:30 AM to 10:00 AM Thursday, December 04, 2008
Break
10:00 AM to 12:00 PM Thursday, December 04, 2008
Characterization, Modeling & Testing
Session Chair: Mr Jorge Gonzalez - USAF HQ AFMC/EN - Air Force
10:00 AM - 10:30 AM
The Effect of Manufacturing Variability on Air Force Systems Presenter: Dr Jeffrey Calcaterra - USAF
10:30 AM - 11:00 AM
How to Assess the Impact of Post-Buckling Load Redistribution on the Fatigue Life Presenter: Mr Michel Godinat - RUAG Aerospace AG
11:00 AM - 11:30 AM
Evaluating the B-2 Aft Deck Measured Response to the External Environment Presenter: Mr John Bailey - 645 Aeronautical Systems Group ASC
11:30 AM - 12:00 PM
Overview of the STOVL Full Scale Static Test on F-35 Lightning II Program Presenter: Ms Marguerite Christian - Lockheed Martin Co
12:00 PM to 1:30 PM Thursday, December 04, 2008
Open Lunch
1:30 PM to 3:00 PM Thursday, December 04, 2008
Flight Loads Assessment
Session Chair: Mr William Buckey - USAF ASC - Air Force
1:30 PM - 2:00 PM
A-10A Operational Usage Development History and Evolution for Extended Operation Presenter: Mr James Kokoris - Northrop Grumman Corp
2:00 PM - 2:30 PM
USAF Helicopter Loads/Environment Spectra Survey (L/ESS) Presenter: Mr Brian Harper - Mercer Engineering Research Center
2:30 PM - 3:00 PM
Verification of IAT Program Models Presenter: Mr Peter Caruso - Lockheed Martin Co Author: Mr Robert Bair - 478th AESW
3:00 PM to 3:30 PM Thursday, December 04, 2008
Break
3:30 PM to 5:30 PM Thursday, December 04, 2008
Life Enhancement / Repair / Replacement Concepts
Session Chair: Col Robert Fredell - USAF Academy - Air Force
3:30 PM - 4:00 PM
Residual Stress Effects in Aircraft Structural Design Presenter: Dr Dale Ball - Lockheed Martin Co Author: Dr Adrian DeWald - Hill Engineering LLC
4:00 PM - 4:30 PM
Using a Beta (β) Correction to Improve the Life Predictions of Cold Expanded Holes in 2024-T3 & 7075-T6 Aluminum Alloys Presenter: Mr Scott Carlson - USAF AFMC
4:30 PM - 5:00 PM
Development of Bonded Repair Guidelines for the Repair of Stress Corrosion Cracking Using Residual Stress Measurement Techniques Presenters: Mr Yan Bombardier - National Research Council Canada Mr Richard Chipman - Proto Manufacturing Ltd
5:00 PM - 5:30 PM
USAF F-16 Wing Pylon Rib Repair Case Study Presenter: Mr Bryce Harris - USAF