Welcome and Introduction
Presenter: Dr Omar Hatamleh - NASA

Adaptation of LSP capability for use on F-22 Raptor Primary Structure at an Aircraft Modification Depot
Presenter: Mr David Jensen - The Boeing Co

Laser Shock Processing with Two Different Laser Sources on 2050-T8 Aluminum Alloy
Presenter: Dr Patrice Peyre - PIMM/CNRS Arts et métiers Paris-Tech
Authors: Mr Laurent Berthe - PIMM/CNRS - Arts et Métiers ParisTech, Mr Stephane Branly - THALES Optronique SA, Mr Frederic Caradec - THALES, Mr Olivier Casagrande - THALES OPTRONIQUE SA, Mr Rémy Fabro - CNRS - Arts et Métiers Paris-Tech, Mr Fabien Ghez - THALES Optronique, Ms Neila Hfaiedh - CNRS-Arts et métiers Paris-Tech, Dr Patrice Peyre - PIMM/CNRS Arts et métiers Paris-Tech

Laser Hardening of Metals
Presenter: Mr Victor Serebryakov - Institute for Laser Physics

Advances in Modeling of Laser Peening for Carburized Steels
Presenter: Mr Richard Tenaglia - LSP Technologies Inc
Authors: Dr Zhichao Li - Deformation Control Technology Inc, Mr Richard Tenaglia - LSP Technologies Inc

Nondestructive Characterization of Laser Peening in Titanium Using Induced Positron Annihilation
Presenter: Mr Timothy Wilson - Positron Systems Inc
Authors: Dr Adrian DeWald - Hill Engineering LLC, Mr Charles Dickerson - Positron Systems Inc, Dr Michael Hill - Hill Engineering LLC, Mr Steven Yano - Positron Systems Inc

Numerical Analysis and Comparison of Shot Peening and Laser Shock Peening Processes
Presenter: Dr Goran Ivetic - University of Bologna
Authors: Dr Goran Ivetic - University of Bologna, Mr Agostino Lanciotti - University of Pisa

Comparison of Surface Integrity and Corrosion Resistance of Laser Peened and Shot Peened ENAW 6082 Alluminium Alloy
Presenter: Mr Janez Grum - University of Ljubljana

A New Laser Peening Process - Potentiality of Femtosecond Laser
Presenter: Mr Yutaro Isshiki - Osaka University

Luncheon

Applications of Laser Peening without Protective Coating to Enhance Structural Integrity of Metallic Components
Presenter: Dr Yuji Sano - Toshiba Corp
Authors: Mr Itaru Chida - Toshiba Corp, Mr Naruhiko Mukai - Toshiba Corp, Dr Yuji Sano - Toshiba Corp, Mr Takuya Uehara - Toshiba Corp, Mr Masaki Yoda - Toshiba Corp

Effect of Laser Peening on Fatigue Life in an Arrestment Hook Shank Application for Naval Aircraft
Presenter: Dr Lloyd Hackel - Metal Improvement Co

Production Laser Peening Using Automated Overlay Applicators
Presenter: Dr Jeff Dulaney - LSP Technologies Inc

Real Time Quality Control for Laser Shock Processing
Presenter: 1st Lt Brice Virell - USAF AFRL/RX
Authors: Dr David Sokol - LSP Technologies Inc, 1st Lt Brice Virell - USAF AFRL

Cancelled Modeling of the Superficial Laser Shock Peening treatment Process: Application on a Titanium Aircraft Turbine Engine Blade
Presenter: Mr Frija Mounir - LABORATOIRE DE GENIE MECANIQUE DE MONASTIR
Author: Mr Raouf Fathallah - ENISo SOUSSE TUNISIA

Advanced Laser Beam Delivery for Mobile Laser Peening
Presenter: Dr C. Brent Dane - Metal Improvement Co Curtiss-Wright
Authors: Mr Fritz Harris - Metal Improvement Co Curtiss-Wright, Mr Randy Hurd - Metal Improvement Co Curtiss-Wright, Mr Edward Lao - Metal Improvement Co Curtiss-Wright, Mr Jon Rankin - Metal Improvement Co Curtiss-Wright

Cancelled Novel Applications of Laser Peening for Aerospace Structures
Presenter: Dr Michael Hahn - Northrop Grumman Corp
Authors: Dr Michael Hahn - Northrop Grumman Corp, Mr Joseph Tubbs - Northrop Grumman Corp, Mr Kyle Unfus - Northrop Grumman Corp

Application of Laser Peening to Fatigue of Steel Bridges
Presenter: Mr Yoshihiro Sakino - Joining & Welding Research Inst Osaka University

Coupled Theoretical-Experimental Analysis of Laser Interaction and Shock Generation in Laser Shock Processing
Presenter: Prof José OCAÑA - Universidad Politécnica de Madrid
Authors: Prof Michel AUTRIC - Université de la Meditérranée, Dr Carlos MOLPECERES - Universidad Politécnica de Madrid, Dr Miguel Morales - Universidad Politécnica de Madrid, Prof José OCAÑA - Universidad Politécnica de Madrid, Dr Juan A. PORRO - Universidad Politécnica de Madrid

Effects of Liquid Overlays and Sacrificial Coatings on Laser Induced Shock Wave Studied by Photoelasticity Technique
Presenter: Ms Thao Nguyen - Nagaoka University of Technology
Authors: Mr Takashi Ishii - Nagaoka University of Technology, Mr Yoshiro Ito - Nagaoka University of Technology, Ms Thao Nguyen - Nagaoka University of Technology, Mr Kenji Oguni - Keio University, Mr Yusuke Shimizu - Nagaoka University of Technology, Ms Rie Tanabe - Nagaoka University of Technology, Mr M L L Wijerathne - The University of Tokyo

Cancelled Natural Vibration Characteristic of Turbine Blade in Laser Shock Processing
Presenter: Mr Shikun Zou - Beijing Aeronautical Mfg Tech Research Inst

Reception

Dinner

Fretting Fatigue of Laser Peened Ti-6Al-4V
Presenter: Dr Allan Clauer - LSP Technologies Inc
Authors: Dr Allan Clauer - LSP Technologies Inc, Dr David Sokol - LSP Technologies Inc

Effect of Laser Shock Processing on Fatigue Crack Growth and Fracture Toughness of Duplex Stainless Steel
Presenter: Dr Carlos Rubio - CIDESI

Effects of Laser Shock Peening on Fatigue Behavior of IN718+ and Ti6242 Alloys
Presenter: Mr Vibhor Chaswal - University of Cincinnati
Authors: Dr K Langer - USAF AFRL/RBSM, Dr S Mannava - University of Cincinnati, Dr D Qian - University of Cincinnati, Dr V Vasudevan - University of Cincinnati

Effects of Laser Shock Peening on the Microstructure and Residual Stress Distributions in Ti-6Al-4V Alloy
Presenter: Mr Yixiang Zhao - University of Cincinnati
Authors: Mr Jon Almer - Argonne National Lab, Mr David Lahrman - LSP Technologies Inc, Mr Ulrich Lienert - Argonne National Lab, Mr S. Mannava - University of Cincinnati, Dr Dong Qian - University of Cincinnati, Mr Yang Ren - Argonne National Lab, Prof Vijay Vasudevan - University of Cincinnati

Cancelled Warm Laser Shock Peening Driven Nanostructures and Their Effects on Fatigue Performance in Aluminum Alloy
Presenter: Professor Gary Cheng - Purdue University

Residual Stress Relaxation in Monotonic and Fatigue Loading
Presenter: Dr Yuji Sano - Toshiba Corp
Authors: Prof Shin-ichi Ohya - Tokyo City University, Dr Toshiyuki Saito - Toshiba Corp, Dr Yuji Sano - Toshiba Corp, Mr Kazuya Takeda - Tokyo City University

Effects of Laser Shock Peening on the Residual Stress Distribution and High-Cycle Fatigue Cracking Resistance of Custom 450 Stainless Steel Specimens
Presenter: Dr Swami Swaminathan - TurboMet International
Authors: Dr Lloyd Hackel - Metal Improvement Co, Mr John Scheibel - Electric Power Research Institute, Dr Swami Swaminathan - TurboMet International, Mr Matt Walter - Metal Improvement Co

Characterization of the Mechano-electrochemical Behavior of a Laser-shock Peened 2050-T8 Aluminum Alloy at Global and Local Scales
Presenter: Dr Patrice Peyre - PIMM/CNRS Arts et métiers Paris-Tech
Authors: Mr Hassan AMAR - ICB/CNRS, Mr Jacques BREUIL - INSA, Mr Vincent JI - ICMMO/LEMHE - Université d'Orsay, Mr Hervé PELLETIER - INSA, Dr Patrice Peyre - PIMM/CNRS Arts et métiers Paris-Tech, Ms Ioanna POPA - ICB/CNRS, Ms Béatrice ROULEAU - PIMM/CNRS Arts et métiers Paris-Tech, Mr Hongbin SONG - PIMM/CNRS Arts et Métiers Paris-Tech, Mr Vincent VIGNAL - ICB / CNRS

Fabrication and Characterization of Porous Surface Microstructure of Biodegradable Magnesium-Calcium Implants by Laser Shock Peening and Finite Element Simulation
Presenter: Mr M.P. Sealy - The University of Alabama
Authors: Mr Andrew Guo - The University of Alabama, Mr M.P. Sealy - The University of Alabama

Experimental Validation of Simulated Fatigue Life Estimates in Laser Peened Aluminum
Presenter: Mr Thomas Spradlin - Wright State University
Authors: Dr Ramana Grandhi - Wright State University, Dr Kristina Langer - USAF AFRL/RBSM

Cancelled Laser Shock Peening: A Solution to Foreign Object Damage Problem
Presenter: Miss Suraiya Zabeen - The University of Manchester
Authors: Dr Michael Preuss - The University of Manchester, Mr Sven Spanrad - The University of Portsmouth, Professor Jie Tong - The University of Portsmouth, Professor Philip Withers - The University of Manchester

Luncheon

Characterization of Laser-peened Materials with High-energy Synchrotron Radiation of Spring-8
Presenter: Dr Yuji Sano - Toshiba Corp
Authors: Prof Koichi Akita - Tokyo City University, Dr Kentaro Kajiwara - Japan Synchrotron Radiation Research Institute, Prof Kiyotaka Masaki - Okinawa National College of Technology, Dr Masugu Sato - Japan Synchrotron Radiation Research Institute

Laser Shock Peening to Improve the Fatigue Resistance of Highly Stressed AA7050 Components
Presenter: Ms Ulrike Heckenberger - EADS Deutschland GmbH
Author: Ms Elke Hombergsmeier - EADS Deutschland GmbH

Surface Layer Properties in Al 7075-T73 and Ti-6Al-4V: Comparing Results after Laser Shock Peening, Shot Peening and Ball-Burnishing
Presenter: Prof Lothar Wagner - Clausthal University of Technology
Authors: Dr Igor Altenberger - Wieland Werke, Dr Mansour Mhaede - Clausthal University of Technology, Dr Yuji Sano - Toshiba Corp

Fatigue Behavior in Al 7075-T73 and Ti-6Al-4V: Comparing Results after Laser Shock Peening, Shot Peening and Ball-Burnishing
Presenter: Prof Lothar Wagner - Clausthal University of Technology
Authors: Dr Igor Altenberger - Wieland Werke, Dr Mansour Mhaede - Clausthal University of Technology, Dr Yuji Sano - Toshiba Corp

A Computational Study on Material Response in Laser Shock Peening of Titanium and Nickel-based Alloys
Presenter: Dr Dong Qian - University of Cincinnati
Authors: Dr Kristina Langer - USAF AFRL/RBSM, Dr Manny Mannava - University of Cincinnati, Prof Vijay Vasudevan - University of Cincinnati

Relaxation of Shot Peened and Laser Shock Peened Residual Stresses
Presenter: Dr Dennis Buchanan - UDRI
Authors: Dr Reji John - USAF AFRL, Dr Michael Shepard - USAF AFRL

Application of Laser Shock Processing on 6061-T6 Aluminum Surface with 1064 nm and 532 nm
Presenter: Mr Gilberto Gomez-Rosas - CUCEI Universidad de Guadalajara

Cancelled The Effects of LSP Parameters on Residual Stresses and Surface Properties
Presenter: Dr Karen Shapiro - Manchester University
Author: Prof Philip Withers - Manchester University

Application of Surface Residual Stresses for Durability and Damage Tolerance Improvements in Wing Attachment Lugs
Presenter: Dr Jeffrey Bunch - The Boeing Co

Basics and Applications of Laser-Driven Shock Phenomena
Presenter: Dr Norimasa Ozaki - Osaka University

Cancelled Residual Stresses Induced by Laser Peening of Thin Aluminium Plates
Presenter: Prof Michael Fitzpatrick - The Open University
Author: Md Burak Toparli - The Open University

Laser Peening of Duplex Stainless Steel for the Application to Seawater Desalination Pump
Presenter: Prof Sungho Jeong - Gwangju Institute of Science & Technology (GIST)

Cancelled The Surface Profile of Laser Peening with Square Spot
Presenter: Mr Shikun Zou - Beijing Aeronautical Mfg Tech Research Inst

Effects of Laser Shock Peening on Residual Stress Distributions and Microstructure of IN718 Superalloy
Presenter: Mr Amrinder Gill - University of Cincinnati
Authors: Dr S.R Mannava - University of Cincinnati, Dr Dong Qian - University of Cincinnati, Prof Vijay Vasudevan - University of Cincinnati

Modeling the Effects of Laser Peening on Friction Stir Welding Residual Stresses
Presenter: Dr Kelly Carney - Glenn Research Ctr
Author: Dr Omar Hatamleh - NASA

Thermomechanical Modelling of Stress Fields in Metallic Targets Subject to Laser Shock Processing
Presenter: Dr Miguel Morales - Universidad Politécnica de Madrid
Authors: Mr Carlos Correa - Universidad Politécnica de Madrid, Dr Carlos MOLPECERES - Universidad Politécnica de Madrid, Dr Miguel Morales - Universidad Politécnica de Madrid, Prof José OCAÑA - Universidad Politécnica de Madrid, Dr Juan A. PORRO - Universidad Politécnica de Madrid

Computational Design Tool for Laser Peening Application Development
Presenter: Dr Michael Hill - Hill Engineering LLC
Author: Dr Michael Hill - Hill Engineering LLC

Finite Element analysis of Laser Shock Peening of Aluminium Alloy 7050-T7451 Thick Plates
Presenter: Dr Goran Ivetic - University of Bologna
Authors: Dr Goran Ivetic - University of Bologna, Mr Agostino Lanciotti - University of Pisa

Residual Stress Behaviors Induced by LP on the Curved Portion of an Aircraft Lug
Presenter: Dr Jongbin Im - Wright State University
Author: Dr Ramana Grandhi - Wright State University

Development of Indirect Laser Peening for Improving the Friction Energy Loss of Pistons
Presenter: Mr Hiroki Inoue - Advanced Laser Technology Research CenterCoLtd
Authors: Mr Kazuo Amano - Aichi-ken Institute for Industrial Technology, Prof Muneharu Kutsuna - Advanced Laser Technology research Ctr CoLtd, Mr Kiyotaka Saito - Saito Kogyo CoLtd

Application of Laser Shock Peening for Spinal Implant Rods
Presenter: Dr Manny Mannava - University of Cincinnati
Authors: Mr Sagar Bhamare - University of Cincinnati, Ms Leonora Felon - X-spine Systems Inc, Mr Andrew Jetter - University of Cincinnati, Dr David Kirschman - X-spine Systems Inc, Mr David Lahrman - LSP Technologies Inc, Dr Dong Qian - University of Cincinnati, Mr Richard Tenaglia - LSP Technologies Inc, Prof Vijay Vasudevan - University of Cincinnati

The Effect of Novel Micro Dent Arrays Fabricated by Laser Shock Peening on Tribology
Presenter: Mr M.P. Sealy - The University of Alabama
Authors: Mr R. Caslaru - The University of Alabama, Mr M.P. Sealy - The University of Alabama

Ohio Center for Laser Shock Processing for Advanced Materials and Devices
Presenter: Prof Vijay Vasudevan - University of Cincinnati
Authors: Dr S Mannava - University of Cincinnati, Prof Peter Nagy - University of Cincinnati, Dr Dong Qian - University of Cincinnati, Prof Jai Sekhar - University of Cincinnati